How to easily clean and maintain your vacuum cleaner.

Sharing is caring!

A clean vacuum is an efficient vacuum! Here how to keep it in top condition.

With out maintenance a vacuum cleaner is only good for moving around dust and dirt. It is one of the most hard working pieces in the whole house. So don’t forget to give it some regular TLC to keep it in top condition.

All bunged up: The most common cause of loss of suction is blockages. This makes the machine slow to pick up, and quick to over heat. To keep this at a minimum, never reuse the bag, as this is often part of the filter system. If it gets clogged with dust it will reduce the efficiency of the machine.

With a bagless machine, empty the canister after each use. For bagged machines, replace the bag when it is 1/3 full. Yes, you read that right, just 1/3.

To unblock a vacuum cleaner always switch it off and unplug as well as pulling out any blockages in the tube. Undo the hose and check the entrance to the top of the bag for further debris.

TIP If the blockage is unmoveable, soak the tube in warm soapy water.

Look after the filters: Many vacuums have at least one filter that is washable. Check where your vacuums filters are located, then remove and tap against a hard surface to remove any clumps of dust – do this outside or you’ll end up surrounded by a dust cloud.

If its washable, run the filter under luke warm water and allow to air dry thoroughly – for at 24 hrs – before returning it to your vacuum cleaner. Additional filters in your vacuum may not be washable, so be sure to check the instruction manual. If they’re not washable, just tap them against a surface to remove clumps of dust then return them to the vacuum.

Brush heads: Make sure the brush on the head is free from hair and threads. If it becomes jammed, cut (don’t pull) any threads that prevent it from rotating. Be careful to avoid cutting the bristles.

Nasty smells: Smelly vacuums are usually the result of not emptying your vacuum regularly enough or possibly sucking up something. Check these first, then give the outside a wipe over with an antibacterial wipe or warm soapy water and a cloth to keep it smelling and looking fresh.

For bagless vacuums, wash the cannister in warm soapy water after emptying and leave it to completely air dry before putting it back in the vacuum.

If your vacuum still isn’t running to the best of its will, then its time to buy a new one.

And here are a few tips to remember when vacuuming. This should help reduce the amount of times you vacuum.

  • 1. Use the vacuums crevice tool to clean around the edges of your room.
  • 2. Use the vacuums crevice tool or flat universal piece to clean under furniture.
  • 3. Start at the corner furthest from the door. Vacuum left to right and then front to back.
  • 4. vacuum your way to the door.

4 thoughts on “How to easily clean and maintain your vacuum cleaner.”

  1. Hi , I do believe this is an excellent blog. I stumbled upon it on Yahoo , i will come back once again. Money and freedom is the best way to change, may you be rich and help other people.

  2. Hi there are using WordPress for your blog platform? I’m new to the blog world but I’m trying to get started and set up my own. Do you require any html coding knowledge to make your own blog? Any help would be greatly appreciated!

Leave a Reply

Your email address will not be published. Required fields are marked *